3 users online | 3 Guests and 0 Registered

Cisco Password Recovery (most edge switches).


  1. Hold down the mode button located on the left side of the front panel, while you reconnect the power cable to the switch.
  2. flash_init
  3. load_helper
  4. dir flash:
  5. rename flash:config.text flash:config.old
  6. boot
  7. enable
  8. rename flash:config.old flash:config.text
  9. copy flash:config.text system:running-config
  10. config t
  11. Fix config.
  12. wr mem

 

Tags: Cisco, password recovery
2014-11-11 19:59 Roy Kidder {writeRevision}
Average rating: 0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.